PDA

View Full Version : T5 swap question


hemdog
12-29-2004, 10:36 AM
What I'm wondering is if there is a different harness for the reverse circuit. I have the switch on the trans, but what about the nuetral safety switch part. I have the switches installed under the dash. My next goal is to replaced the trans itself but whatabout the harnesses? Any info would be great. Also, I can't remember which way the clutch cable goes around the rack area. Thanks.

hemdog
12-29-2004, 11:20 AM
One other thing. There is some debate as to me needing the manual pcm vs the auto pcm that i have. Will I need the manual one? If I do, I believe it is the AL9?

playpool
12-29-2004, 06:02 PM
what year is your car? if its a sn95 you need to get a new harness that runs from the upper pass. side of car. next to impossible to find w/o spending a pretty penny. if it is fox car i cant remember, but i have done swaps on both fox and sn95 cars. pm me if you want..maybe two heads can make one good answer!! nate

playpool
12-29-2004, 06:04 PM
for the pcm..i member i ran the auto on my fox body...i heard it doesnt matter in my case..i was told my car would actually run better and save gas. it was a 87 gt.

hemdog
12-29-2004, 07:06 PM
Oh yeah, forgot that part. It is a 91.

Nick 1
12-30-2004, 06:12 AM
Joe, you can use your PCM, but your car will run better with one out of a stick car. :thumbs_up



Nick 1

whiteyford
02-27-2005, 09:33 PM
i have the the auto pcm still in my car and i swaped it over to stick as far as the neutral safty switch and stuff my dad just jump them out

Kelly
03-01-2005, 09:20 PM
just jump the 2 wires,i will post tomorrow what the colors are,i just did the swap.