parish99
01-08-2005, 10:51 AM
I have a few questions about the spacers and stuff. I would like to get it as close as possible right of the bat, and I know there other with the same combination out there.
Ok, here is a list of what I am installing:
MM caster camber,
bisltein struts,
95 cobra spindles and brakes,
steeda bump steer kit,
Steeda X2 ball joints,
H&R super sport springs,
The MM caster camber kit comes with bump stops, do I put these over the bilster dust boots or do they have there own interal bump stops.
Also the MM kit comes with spacer shims to put on top of the strut before you put it up into the shock tower. The H&R's are supposed to lower the front about 1.5".
And the bump steer kit also comes with different spacers, I will be using regular steering rack bushing not offset.
Ok, here is a list of what I am installing:
MM caster camber,
bisltein struts,
95 cobra spindles and brakes,
steeda bump steer kit,
Steeda X2 ball joints,
H&R super sport springs,
The MM caster camber kit comes with bump stops, do I put these over the bilster dust boots or do they have there own interal bump stops.
Also the MM kit comes with spacer shims to put on top of the strut before you put it up into the shock tower. The H&R's are supposed to lower the front about 1.5".
And the bump steer kit also comes with different spacers, I will be using regular steering rack bushing not offset.