PDA

View Full Version : flywheel dowel pins?

Kelly
02-18-2005, 09:53 PM
where can i get these????nobody has them around here and i am out of idea here.can anyone help me out PLEASE!!!!!!!
quietflow
02-18-2005, 10:24 PM
Ford dealer?
markstang
02-19-2005, 07:31 AM
what size are they? I have alot of dowel pins at work, maybe we have the 1s you need.



Mark
Kelly
02-19-2005, 08:47 AM
i honestly dont know what size they are...the flywheel didnt have them to begine with.and the ford dealerships told me they were on back order.
markstang
02-19-2005, 09:00 AM
can you measure what diameter hole is in the flywheel. use a drill set or something. figure out what drill fits in the hole with very little play & then you'll know what size dowel pin you need. then measure how deep the drill will go into the hole in the flywheel & how thick the clutch is. then you will know how long the pin should be.... I have not used a stock flywheel in a long time but I think they are 3/16 diameter by about 3/4 long. I have a bunch at work or a good hardware store has them also.



Mark
Kelly
02-19-2005, 09:15 AM
thanks mark
95GT
02-19-2005, 06:34 PM
They are not just a straight pin. It is a stepped pin. .250" (pressure plate) .3125" (flywheel) and about .7" long.
Kelly
02-20-2005, 11:21 AM
were can i get them???anybody??
scooter
02-20-2005, 02:49 PM
how about automotive supply?
upngo50
02-20-2005, 07:15 PM
Any machine shop should have them, otherwise try a different ford dealer.

Kelly I got mine from B&B the last time I had my flywheel turned.
Kelly
02-20-2005, 10:29 PM
ill try B&B tomorrow
Ghost
02-20-2005, 11:17 PM
you could try Randy at Liberty Ford in MD
410-655-2000

just ask for Randy in parts, he is where I got all my gaskets,bolts,sprockets and such for my cam swap
FastGT94
02-21-2005, 10:14 AM
I have three, brand new, just sittin in a box that I'll never use. PM me or email me if you want em. I can drop em in the mail sometime if ya like.

-Dale
Nick 1
02-22-2005, 10:23 PM
you could try Randy at Liberty Ford in MD
410-655-2000

just ask for Randy in parts, he is where I got all my gaskets,bolts,sprockets and such for my cam swap

Should have bought them from Torch Red GT & saved yourself some money Tony. :thumbs_up
RSNovi
02-23-2005, 08:14 AM
We just got some from the dealership a few months ago.
FastGT94
02-23-2005, 01:49 PM
Kelly, tried to call you and left a voice mail. All I need is your address and I can mail them out for you. PM me your address and I'll drop em in the mail! :D
FastGT94
03-10-2005, 03:16 PM
Did they find you ok Kelly? I sent them out last week.