Still Squealing?!?!?!?!?!?!?!

[Kelly]

so i replaced the TO bearing and pilot bearing and the thing still squeals once it warmes up.....im out of ideas and losing it trying to figure out what is squealing here,it does it once it warmed up and squeals at all times even with the clutch in out ,in gear or nuetral...please help.

[upngo50]

hmmmmmm...maybe internal to the trans. What is the history on your t-5? I want to here it.

[portponies]

I could go thru the trans for you to rule it out.

[Kelly]

i have no history of the trranse,i got it for free,both of the upper shift forks were broken when i got the trans...brent i work at the lube pros in menasha by goodwill,if u get a chance swing on by.

[90ramair]

I had a similar prob and found that it was the tension on the clutch cable...took a while of messin with that till i found the right tension.
Good luck!

[Kelly]

the problem is i dont have an adjustable cluthc cable so i cant adjust the tension on it.

[90ramair]

I would recomend getting one, they aren't too expensive, and i have seen some now that come with the firewall adjuster so theres no crawling under the car. I think its worth it, also the stock self adjusting one ive heard is very weak.

[Kelly]

it has the aftermarket quadrant in it already....upngo50 was here yesterday looking at it and it seems to be coming from the front of the bellhousing at the blocking plate,almost like something is rubbing on the plate.

[90ramair]

Hmm? not sure what that would be? I hate thoughs "where is that coming from?" noises! sorry couldnt help, but good luck! :thumbs_up

[TheRealStubot]

I recommend Maximum Motorsports universal cable, quadrant and firewall adjuster. My son and I installed one in about 2 hours ( I made him crawl under the dash and replace the quadrant ) The quadrant is a bit fast acting for street driving, but it's well made and easy to install. If I were to change it, I would put a half round quadrant on the street car, not the cam lobe looking thing they include in the kit.