Wheel Stud Question (Again!)

[dufkis]

Ok what is the rule for front wheel studs. I see some guys running reg closed end lug nuts on the front and the 3" studs on the rear and get pass tech. Can you do this or no? Also the studs I have it looks like i need to drill the holes in the rotor bigger but I cant seem to figure out the right size bit. Thanks

[NitrousEdge]

I got the 3" in the front also, better to be safe than sorry. For the Modulars it is a 39/64 drill bit using the .625 knurl studs (not sure if the fox's are the same)...

[BBATCO1]

They are the same. the stud must protrude from the wheel as long as it is wide. If it is a half inch stud it myst stick out 1/2 inch from the wheel....

[Ghost]

They are the same. the stud must protrude from the wheel as long as it is wide. If it is a half inch stud it myst stick out 1/2 inch from the wheel....

from the wheel or the lug :shrug:

[dufkis]

I got the 3" in the front also, better to be safe than sorry. For the Modulars it is a 39/64 drill bit using the .625 knurl studs (not sure if the fox's are the same)...

Yeah thanks Eric thats the same size knurl that mine r

[BBATCO1]

from the wheel or the lug :shrug:
From the wheel

[onewickedstang]

open lugs and long studs are mandatory on all 4 wheels for all cars running 10.99 and quicker.

[Jim]

.....and if you use the gold arp's with the .625 knurl use a 39/64" bit. :D

[Jim]

now i understand the welder thread.

[Jim]

i have one for you.

[Jim]

you could paint the one i have......

[Jim]

i'm off thursday and friday, i don't have the bit, but if tripod said he has it he could leave it with me. let me know what time you plan on coming......later afternoon works best for me cause i think we are gonna try to get some walleyes early thursday.