PDA

View Full Version : SCT Flashed Now!


Kirk
05-24-2004, 06:26 PM
I finally went & flashed my EEC today with the new SCT flasher & software.

I was waiting since the big V6 race is this weekend & I did not want to take any chances with anything going wrong.

Well I got a verification from Jerry that the base file I recieved had all of the latest changes that he & Chris Johnson had made for me last dyno day.

So I went for it. I pulled the chip and connected the flasher and let it rip.

Success!

My flasher can hold 3 custom tunes so now I am working on one just for the track. Basically some more tranny mods.

Then I will make one up for dyno pulls so the auto behaves & won't shift out of third.

I will say this is some very cool software. They are going to be releasing their datalogging solution next month and it is supposed to be the fastest & best out there.

Jesse James
05-24-2004, 06:55 PM
Veery Cool Kirk :banana: "Kirk The Tuner" :shifter: :thumbs_up :boobies: :p

Kirk
05-24-2004, 07:08 PM
Thanks.

I tell you there is so much to learn and so much you can control.

It's going to take a bit of hands on time. But very cool stuff.

Greg@GLD
05-24-2004, 07:50 PM
Excellent! I hope this gives you somewhat of an edge at the V6 challenge.

Does the SOTP meter have good news to report???

Kirk
05-24-2004, 07:57 PM
It is right now the same Tune Jerry & Chris did for me last August.

Jerry just combined the values from my EEC and their adjustments with my previous dyno tune as a starting point. My next step is to tweak the tranny settings for the track.

But it does run nice. I took it out a hammered it a few times to make sure all of their previous settings made it.